-
Altair 3 Pro has some awesome new features including a complete enclosure, flexplate for easy print removal and auto calibration. Altair 3 Pro also comes with the NOVA all-metal hot end, instant-on heated bed, and all metal frame construction.
-
The Affordable Printer for Everyone
An easy-to-use, durable desktop 3D printer ready to improve precision standards, scale production, and add a powerful new manufacturing resource.
-
Altair comes standard with the NOVA all-metal hot end. But, if you would like to have multiple hot ends with different nozzle sizes to easily swap out, you can purchase an extra NOVA hot end. -
.50mm Advanced Thermally Conductive Nozzle for 1.75mm Filament
- Advanced thermally conductive alloy gives optimized heat transfer to filament, transfers heat with twice the efficiency of brass nozzles
- Hardened alloy reduces nozzle wear
- Long lasting - Works with any material but optimized for use with more abrasive filaments
- Specially engineered for improved lubricity and low friction
- Reduce extrusion stress and help prevent hang-ups
- High hardness for a lifetime of printing
- Reduce plastic curl during extrusion
-
.40mm Advanced Thermally Conductive Nozzle for 1.75mm Filament
- Advanced thermally conductive alloy gives optimized heat transfer to filament, transfers heat with twice the efficiency of brass nozzles
- Hardened alloy reduces nozzle wear
- Long lasting - Works with any material but optimized for use with more abrasive filaments
- Specially engineered for improved lubricity and low friction
- Reduce extrusion stress and help prevent hang-ups
- High hardness for a lifetime of printing
- Reduce plastic curl during extrusion
-
Ready for an upgrade from other free slicing software packages? Or, do you need an additional license of Simplify3D? Simplify3D is powerful 3D printing software that provides complete control over your print settings, making it easier to consistently produce high-quality 3D prints. Start up quickly with pre-configured settings optimized for Altair, review a simulation of your build sequence in the Preview Mode, and begin your 3D print with confidence. Now available at www.simplify3d.com -
Out of stock
The X5 mini is a 32 bit ARM based Motion controller for 3D printers, CNC Machines and Laser cutters. The X5 mini runs on Smoothieware firmware and is based on Smoothieboard by the awesome Arthur Wolf. The X5 mini uses the powerful 32bit, 120Mhz NXP LPC1769 ARM chip capable of faster calculations for faster and smoother movements. • Compact and powerful all in one solution. • Board dimensions = 2" x 3.8" (51 mm x 97 mm) *The X5 Mini requires a micro SD memory card. -
Heated Bed & Build Plate Assembly Upgrade
This is a replacement bed and heating element for all Altair 1 and Altair 2 printers. This heated bed option is ideal for printing with ABS and for reducing warp for large PLA prints. The heated bed has two parts: a silicone heating element and a a Borosilicate glass build surface (10.5" round) that provides a very durable, level surface for printing on. -
.50mm Brass Nozzle for 1.75mm Filament
• Made in America! • Universal, precision machined brass nozzles for use extruding with most 3D printers • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • .50mm brass nozzle orifice diameter • M6 thread with M7 hex • Excellent for ABS, PLA, and Nylon filament • For Extruders and 3D Printers -
.40mm Brass Nozzle for 1.75mm Filament
• Made in America! • Universal, precision machined brass nozzles for use extruding with most 3D printers • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • .35mm brass nozzle orifice diameter • M6 thread with M7 hex • Excellent for ABS, PLA, and Nylon filament • For Extruders and 3D Printers -
.35mm Brass Nozzle for 1.75mm Filament
• Made in America! • Universal, precision machined brass nozzles for use extruding with most 3D printers • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • .35mm brass nozzle orifice diameter • M6 thread with M7 hex • Excellent for ABS, PLA, and Nylon filament • For Extruders and 3D Printers -
.25mm for 1.75mm Filament
• Made in America! • Universal, precision machined brass nozzles for use extruding with most 3D printers • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • .25mm Orifice Diameter • M6 thread with M7 hex • Excellent for ABS, PLA, and Nylon filament • For Extruders and 3D Printers -
.35mm Brass Nozzle for 3mm Filament
• Made in America! • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • M6 thread with M7 hex • Excellent for ABS, PLA, HIPS, Laywood, Copper Fill, Nylon, and more • For Extruders and 3D Printers • Designed to reduce extrusion force and back pressure • Reduces jams • Stay-clean tip -
.35mm Brass Nozzle for 1.75mm Filament
• Made in America! • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • M6 thread with M7 hex • Excellent for ABS, PLA, HIPS, Laywood, Copper Fill, Nylon, and more • For Extruders and 3D Printers • Designed to reduce extrusion force and back pressure • Reduces jams • Stay-clean tip -
This Borosilicate glass is for those who prefer to print directly on glass, or print with Kapton tape on glass with no heating element.- Round 270mm
- 3mm thick
- Boro glass
- Can handle continuous use up to 500 degrees F (260 C)
- Extremely durable
- Low coefficient of thermal expansion
- Perfectly flat surface, perfect for printing
- Ground edges (No cut fingers)
-
Brass Nozzle Variety Pack includes 4 sizes: .25mm, .35mm, .40mm, .50mm
• for 1.75mm Filament • Made in America! • Universal, precision machined brass nozzles for use extruding with most 3D printers • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • M6 thread with M7 hex • Excellent for ABS, PLA, and Nylon filament • For Extruders and 3D Printers -
Ready for a spool holder that can hold any size of spool, and will keep your filament running smoothly? The PrintSpace spool holder was designed just for that. Made from powder coated aluminum, this spool holder is going to last. -
Having problems getting your 3D prints to stick? Ready to put away the blue tape, kapton, hairspray, ABS juice or other solutions? We have the answer! BuildTak is a thin, durable plastic sheet that adheres to the print bed of FFF (fused filament fabrication) 3D printers. It provides an optimal printing surface for 3D objects to adhere to for the duration of a print, while allowing for a clean, easy removal of completed builds. -
Having problems getting your 3D prints to stick? Ready to put away the blue tape, kapton, hairspray, ABS juice or other solutions? We have the answer! BuildTak is a thin, durable plastic sheet that adheres to the print bed of FFF (fused filament fabrication) 3D printers. It provides an optimal printing surface for 3D objects to adhere to for the duration of a print, while allowing for a clean, easy removal of completed builds.
-
Low Profile Brass Nozzle for 3mm Filament Variety Pack of .25mm, .35mm, .40mm, .50mm
• Made in America! • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • M6 thread with M7 hex • Excellent for ABS, PLA, HIPS, Laywood, Copper Fill, Nylon, and more • For Extruders and 3D Printers • Designed to reduce extrusion force and back pressure • Reduces jams • Stay-clean tip -
Low Profile Brass Nozzle for 1.75mm Filament Variety Pack of .25mm, .35mm, .40mm, .50mm
• Made in America! • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • M6 thread with M7 hex • Excellent for ABS, PLA, HIPS, Laywood, Copper Fill, Nylon, and more • For Extruders and 3D Printers • Designed to reduce extrusion force and back pressure • Reduces jams • Stay-clean tip -
Out of stock
.35 mm FDA Stainless Nozzle for 1.75mm Filament
These .35mm wear resistant nozzles are especially recommended for use with FDA approved filaments. Universal nozzle design suitable for RepRap, Makerbot MK8, J-Head Hot End, Prusa, Mendel, and more. -
.25mm Brass Nozzle for 3mm Filament
• Made in America! • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • M6 thread with M7 hex • Excellent for ABS, PLA, HIPS, Laywood, Copper Fill, Nylon, and more • For Extruders and 3D Printers • Designed to reduce extrusion force and back pressure • Reduces jams • Stay-clean tip -
.50mm Brass Nozzle for 1.75mm Filament
• Made in America! • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • M6 thread with M7 hex • Excellent for ABS, PLA, HIPS, Laywood, Copper Fill, Nylon, and more • For Extruders and 3D Printers • Designed to reduce extrusion force and back pressure • Reduces jams • Stay-clean tip -
.40mm Brass Nozzle for 1.75mm Filament
• Made in America! • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • M6 thread with M7 hex • Excellent for ABS, PLA, HIPS, Laywood, Copper Fill, Nylon, and more • For Extruders and 3D Printers • Designed to reduce extrusion force and back pressure • Reduces jams • Stay-clean tip -
.50mm Brass Nozzle for 3mm Filament
• Made in America! • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • M6 thread with M7 hex • Excellent for ABS, PLA, HIPS, Laywood, Copper Fill, Nylon, and more • For Extruders and 3D Printers • Designed to reduce extrusion force and back pressure • Reduces jams • Stay-clean tip -
Out of stock
.40mm Brass Nozzle for 3mm Filament
• Made in America! • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • M6 thread with M7 hex • Excellent for ABS, PLA, HIPS, Laywood, Copper Fill, Nylon, and more • For Extruders and 3D Printers • Designed to reduce extrusion force and back pressure • Reduces jams • Stay-clean tip -
Sample Printed Object
PRODUCT DETAILS
- Object printed for customer's evaluation of printing accuracy and performance
- Choose a material for your object
- Specific object shape will vary depending on availability
- If you would like to request a custom printed part, please contact us for pricing
-
Carbon Fiber Reinforced PLA is a stiff material and makes parts that are very solid. It is great for printing high-strength mechanical parts. Increased rigidity from the carbon fiber means increased structural support but decreased flexibility, making it ideal material for frames, supports, propellers, tools... anything not expected (or desired) to bend. It is particularly loved by drone builders and RC hobbyists. The carbon fibers are processed to an optimum size: short enough to print in PLA without clogging nozzles, but long enough to provide the added rigidity carbon fiber is famous for. -
Taulman BluPrint is a thermoplastic copolyester blend. It is a material with increased heat and wear resistance. The material can be used to print parts that will withstand fatigue resistance and tear strength. BluPrint allows designers to 3D print parts that will take high heat for outdoor use such as part replacements for autos, boats and aircraft. -
Polymaker PolyPlus™ Green PLA filament is engineered for quality superior to other PLA filaments. The probability of jamming your extruder is significantly lower with the PolyPlus series. PolyPlus is FDA approved, has excellent heat resistance, and tight and consistent tolerances. It comes in a variety of colors and translucent. -
Polymaker PolyPlus™ Grey PLA filament is engineered for quality superior to other PLA filaments. The probability of jamming your extruder is significantly lower with the PolyPlus series. PolyPlus is FDA approved, has excellent heat resistance, and tight and consistent tolerances. It comes in a variety of colors and translucent. -
Polymaker PolyPlus™ Purple PLA filament is engineered for quality superior to other PLA filaments. The probability of jamming your extruder is significantly lower with the PolyPlus series. PolyPlus is FDA approved, has excellent heat resistance, and tight and consistent tolerances. It comes in a variety of colors and translucent. -
Taulman Black T-Glase is made of FDA approved polymers for direct food contact or containers. T-Glase is a high strength polymer – great for industrial applications. The major advantage of T-Glase to all other polymers, is layer to layer bonding. Industry uses layer settings that are 50% to 80% of the nozzle diameter with excellent results. In addition, T-Glase is a directly printable polymer for glass jewelry. -
Polymaker PolyPlus™ Teal PLA filament is engineered for quality superior to other PLA filaments. The probability of jamming your extruder is significantly lower with the PolyPlus series. PolyPlus is FDA approved, has excellent heat resistance, and tight and consistent tolerances. It comes in a variety of colors and translucent. -
Polymaker PolyPlus™ Orange PLA filament is engineered for quality superior to other PLA filaments. The probability of jamming your extruder is significantly lower with the PolyPlus series. PolyPlus is FDA approved, has excellent heat resistance, and tight and consistent tolerances. It comes in a variety of colors and translucent. -
Polymaker PolyPlus™ Translucent Orange PLA filament is engineered for quality superior to other PLA filaments. The probability of jamming your extruder is significantly lower with the PolyPlus series. PolyPlus is FDA approved, has excellent heat resistance, and tight and consistent tolerances. -
3D print with metal with your own 3D printer! This amazing one of a kind filament will allow you to print with actual copper and will shine like copper after polishing. -
Corkfill is a specialty filament which looks, feels, and behaves just like cork material. You can use Corkfill to make light-weight wood objects or traditional cork items such as dart boards and wine corks. Corkfill is a combination of PLA and Cork wood fibers. Colorfabb's Corkfill is PLA based, so you can print this filament on any printer than can handle PLA filament. -
Taulman White T-Glase is made of FDA approved polymers for direct food contact or containers. T-Glase is a high strength polymer – great for industrial applications. The major advantage of T-Glase to all other polymers, is layer to layer bonding. Industry uses layer settings that are 50% to 80% of the nozzle diameter with excellent results. In addition, T-Glase is a directly printable polymer for jewelry. -
PolyMaker PolyWood filament is engineered for quality superior to other filaments. PolyWood™ is a wood mimic printing material that ensures a Jam-Free™ printing experience. -
Taulman BluPrint is a thermoplastic copolyester blend. It is a material with increased heat and wear resistance. The material can be used to print parts that will withstand fatigue resistance and tear strength. BluPrint allows designers to 3D print parts that will take high heat for outdoor use such as part replacements for autos, boats and aircraft. -
Do you have a project that needs a flexible part but you just can’t get it with PLA or ABS? With PolyFlex™ flexible filament you can make your flexible parts without the need to modify you 3D printer. PolyFlex™ prints excellently with Altair or many other FDM printers. • Create both limber and elastic prints • Bonds to most to bond to most build plate surfaces • Don't need a heated bed -
Do you have a project that needs a flexible part but you just can’t get it with PLA or ABS? With PolyFlex™ flexible filament you can make your flexible parts without the need to modify you 3D printer. PolyFlex™ prints excellently with Altair or many other FDM printers. • Create both limber and elastic prints • Bonds to most to bond to most build plate surfaces • Don't need a heated bed -
Do you have a project that needs a flexible part but you just can’t get it with PLA or ABS? With PolyFlex™ flexible filament you can make your flexible parts without the need to modify you 3D printer. PolyFlex™ prints excellently with Altair or many other FDM printers. • Create both limber and elastic prints • Bonds to most to bond to most build plate surfaces • Don't need a heated bed -
Do you have a project that needs a flexible part but you just can’t get it with PLA or ABS? With PolyFlex™ flexible filament you can make your flexible parts without the need to modify you 3D printer. PolyFlex™ prints excellently with Altair or many other FDM printers. • Create both limber and elastic prints • Bonds to most to bond to most build plate surfaces • Don't need a heated bed -
Polymaker PolyPlus™ Blue PLA filament is engineered for quality superior to other PLA filaments. The probability of jamming your extruder is significantly lower with the PolyPlus series. PolyPlus is FDA approved, has excellent heat resistance, and tight and consistent tolerances. It comes in a variety of colors and translucent. -
Polymaker PolyPlus™ Translucent Blue PLA filament is engineered for quality superior to other PLA filaments. The probability of jamming your extruder is significantly lower with the PolyPlus series. PolyPlus is FDA approved, has excellent heat resistance, and tight and consistent tolerances. It comes in a variety of colors and translucent. -
Polymaker PolyPlus™ Translucent Red PLA filament is engineered for quality superior to other PLA filaments. The probability of jamming your extruder is significantly lower with the PolyPlus series. PolyPlus is FDA approved, has excellent heat resistance, and tight and consistent tolerances. It comes in a variety of colors and translucent. -
Polymaker PolyPlus™ Translucent Yellow PLA filament is engineered for quality superior to other PLA filaments. The probability of jamming your extruder is significantly lower with the PolyPlus series. PolyPlus is FDA approved, has excellent heat resistance, and tight and consistent tolerances. It comes in a variety of colors and translucent. -
Polymaker PolyPlus™ Red PLA filament is engineered for quality superior to other PLA filaments. The probability of jamming your extruder is significantly lower with the PolyPlus series. PolyPlus is FDA approved, has excellent heat resistance, and tight and consistent tolerances. It comes in a variety of colors and translucent.
-
Polymaker PolyPlus™ Red PLA filament is engineered for quality superior to other PLA filaments. The probability of jamming your extruder is significantly lower with the PolyPlus series. PolyPlus is FDA approved, has excellent heat resistance, and tight and consistent tolerances. It comes in a variety of colors and translucent. -
Polymaker PolyPlus™ White PLA filament is engineered for quality superior to other PLA filaments. The probability of jamming your extruder is significantly lower with the PolyPlus series. PolyPlus is FDA approved, has excellent heat resistance, and tight and consistent tolerances. It comes in a variety of colors and translucent.
-
Polymaker PolyPlus™ PLA filament is engineered for quality superior to other PLA filaments. The probability of jamming your extruder is significantly lower with the PolyPlus series. PolyPlus is FDA approved, has excellent heat resistance, and tight and consistent tolerances. It comes in a variety of colors and translucent.
-
PolyMax PLA is the perfect replacement for ABS. PolyMax PLA is a "tough PLA" 3D printing material that has high toughness and strength. Print at low temperatures like PLA, but get the strength of ABS. PolyMax Black PLA has minimal degradation and warping, and will not create any hazardous fumes. Works well for mechanically demanding applications. -
PolyMax PLA is the perfect replacement for ABS. PolyMax PLA is a "Tough" 3D printing material that has high toughness and strength. Print at low temperatures like PLA, but get the strength of ABS. PolyMax PLA has minimal degradation and warping, and will not create any hazardous fumes. Works well for mechanically demanding applications. -
Taulman 680 FDA Nylon is a very high grade nylon made with an FDA approved polymer specifically developed to meet FDA 21 CFR 177.1500 regarding indirect food contact (except for foods with over 8% Alcohol). Taulman 680 was designed to print in the same temperature range as other taulman nylons. It is less pliable than Taulman 645 as it is intended to support many medical uses. Taulman 680 is more transparent than Taulman 645 to support non-destructive visual inspection of printed parts. 680 is a non-leaching FDA nylon that's capable of low temperature sterilization techniques. -
Taulman Alloy 910 is meant for high-temperature, high-strength, high-durability uses. Alloy 910 is an excellent material for molding, robotics, machining or any need that requires a high tensile feature along with high durability. Due to Alloy 910's chemical composition, it has the least water absorption of all similar materials containing a nylon component. -
Taulman Red T-Glase is made of FDA approved polymers for direct food contact or containers. T-Glase is a high strength polymer – great for industrial applications. The major advantage of T-Glase to all other polymers, is layer to layer bonding. Industry uses layer settings that are 50% to 80% of the nozzle diameter with excellent results. In addition, Taulman Red T-Glase is a directly printable polymer for glass clear jewelry. -
Taulman Blue T-Glase is made of FDA approved polymers for direct food contact or containers. T-Glase is a high strength polymer – great for industrial applications. The major advantage of T-Glase to all other polymers, is layer to layer bonding. Industry uses layer settings that are 50% to 80% of the nozzle diameter with excellent results. In addition, Taulman Blue T-Glase is a directly printable polymer for glass clear jewelry. -
Taulman Clear T-Glase is made of FDA approved polymers for direct food contact or containers. T-Glase is a high strength polymer – great for industrial applications. The major advantage of T-Glase to all other polymers, is layer to layer bonding. Industry uses layer settings that are 50% to 80% of the nozzle diameter with excellent results. In addition, T-Glase is a directly printable polymer for glass clear jewelry.
-
Taulman 645 Nylon is the #1 high strength 3D printing material of choice used by 100's of Industrial customers worldwide. Nylon 645 is the established industry standard for high strength, high durability 3D Printing. Over 60 corporations and manufacturing companies use Nylon 645 for their most demanding designs and needs. Taulman 645 is a preferred polymer when parts to be printed will be subject to high stresses. As an extremely durable polymer, it handles stress at elevated temperatures up to 160C. It has a higher strength than Taulman 618 and is 20% less pliable and 20% more resistance to chlorines. -
Taulman Bridge Nylon Filament is a variation of Taulman 645 Nylon. Taulman Bridge Nylon Filament carries the same flexibility as Taulman 645 and has a slippery surface texture. It maintains the strength of nylon while having less warping, better adhesion to the print bed, and is easier to print with. Taulman Bridge Nylon is used for any parts that require the strength of nylon, yet are large and prone to pulling away from the print bed at sharp transitions. It is ideal for printing industrial applications such as gears. -
Taulman 618 high strength nylon is specifically engineered for 3D printing. Taulman 618 nylon was the first nylon specifically formulated and processed for 3D Printing. The chemical composition and post processing work together to lower the print temperature as well as reduce the non-uniformity that nylons exhibit in the melted state. When Taulman 618 is printed with 100% fill, it rivals it's injection molded equivalents in strength. All of the features of nylon that we come to depend on are at the maximum in 618. -
PrintSpace Premium PLA is a high-end 3D printer filament. At PrintSpace we pride ourselves on quality. That is why our Premium PLA is made of 100% virgin material and made in America to deliver highest quality standards and tolerances. This proprietary PLA blend makes our filament tougher, slightly softer, less rigid, more preservable then other filaments. With our Premium PLA you will get a low shrinkage factor (making prints nearly warp-free). Our PLA will not deform after cooling. Due to its low tendency to warp our Premium PLA can be printed without a heated print bed. Filament tolerances +/- .02mm -
Carbon Fiber Reinforced PLA is a stiff material and makes parts that are very solid. It is great for printing high-strength mechanical parts. Increased rigidity from the carbon fiber means increased structural support but decreased flexibility, making it ideal material for frames, supports, propellers, tools... anything not expected (or desired) to bend. It is particularly loved by drone builders and RC hobbyists. The carbon fibers are processed to an optimum size: short enough to print in PLA without clogging nozzles, but long enough to provide the added rigidity carbon fiber is famous for.
Call Us: 208-557-1886
