Taulman Bridge Nylon Filament is a variation of Taulman 645 Nylon. Taulman Bridge Nylon Filament carries the same flexibility as Taulman 645 and has a slippery surface texture. It maintains the strength of nylon while having less warping, better adhesion to the print bed, and is easier to print with. Taulman Bridge Nylon is used for any parts that require the strength of nylon, yet are large and prone to pulling away from the print bed at sharp transitions. It is ideal for printing industrial applications such as gears.
Description
Taulman Bridge Nylon has the following benefits:
- Lab certified measure of tensile strength
- Better Adherence to a printing platform
- Reduced water up-take from humidity
- Non-destructive evaluation testing (opacity)
- Reduce shrinkage
- Stronger and more durable than PLA and ABS
Specifications
Print temperature: 245C – 265C
Recommended Bed Temperature: 70ºC-80ºC
Bed Surface: Glass heated with coat of PVA
Nozzle: any size
Print speed: 80% of ABS speeds
Retraction: 1mm/.1mm nozzle or fop a .5mm nozzle = 5mm
Dimensional Accuracy: ± 0.05mm
Weight: 1 Pound
NOTE: Store Taulman Bridge Nylon in an air tight container with desiccants or a de-humidifier when not in use. Make sure to dry nylon if it has been left in any humidity at all. All nylons will re-absorb humidity from the surrounding air within 18 hours.
Additional information
Weight | 1 lbs |
---|
Reviews
There are no reviews yet.